75BNRD10X
| BNRD: 18° | Bearing Type | ||
| d | 75 | mm | Bore diameter |
| D | 115 | mm | Outside diameter |
| B | 20 | mm | Width |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 67.0 | kN | Basic Dynamic Load Rating |
| C0r | 23.1 | kN | Basic Static Load Rating |
| Grease | 22200 | min-1 | Limiting Speed |
| Oil (Oil-air) | 34800 | min-1 | Limiting Speed |
| da(min.) | 82 | mm | Diameter of Shaft Abutment |
| Da(max.) | 108 | mm | Diameter of Housing Abutment |
| Db(max.) | 110 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
| f0 | 8.20 | Factor |
Performance
| Pa | 22.4 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 49N | 58N/μm | 0μm |
| L | 432N | 127N/μm | -16μm |
| M | 875N | 167N/μm | -28μm |
| 0.557 | kg | Mass(approx.) |