220BAR10S
| BAR: 30° | Bearing Type | ||
| d | 220 | mm | Bore diameter |
| D | 340 | mm | Outside diameter |
| 2B | 108 | mm | Assembled Width |
| r(min.) | 3 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 189 | kN | Basic Dynamic Load Rating |
| C0a | 505 | kN | Basic Static Load Rating |
| Grease | 2400 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 3100 | min-1 | Limiting Speed (EL-Preload) |
| Grease | 2100 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 2700 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 234 | mm | Diameter of Shaft Abutment |
| Db(max.) | 333 | mm | Diameter of Housing Abutment |
| ra(max.) | 2.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 340 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 626N | 406N/μm | -5μm |
| L | 7839N | 973N/μm | -45μm |
| 18.5 | kg | Mass(approx.) |