NUP208ET7
| d | 40 | mm | Bore diameter |
| D | 80 | mm | Outside diameter |
| B | 18 | mm | Width |
| FW | 49.5 | mm | Raceway diameter of inner ring |
| r (min.) | 1.1 | mm | Chamfer dimension |
| r1 (min.) | 1.1 | mm | Chamfer dimension |
| Cr | 68500 | N | Basic dynamic load rating |
| C0r | 55500 | N | Basic static load rating |
| Thermal Speed Rating (Oil-bath) | 9000 | min-1 | Oil-bath lubrication subject to conditions outlined in ISO 15312 |
| Mechanical (forced-circulation oil) | 11000 | min-1 | Properly designed and controlled forced-circulation oil lubrication |
| Grease | 7500 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 9000 | min-1 | Oil-bath lubrication |
| da (min.) | 46.5 | mm | Diameter of shaft abutment |
| dd (min.) | 56 | mm | Diameter of shaft abutment |
| Da (max.) | 73.5 | mm | Diameter of housing abutment |
| ra (max.) | 1 | mm | Radius of shaft or housing fillet |
| rb (max.) | 1 | mm | Radius of shaft or housing fillet |
| (approx.) | 0.392 | kg |