NUP244EM
| d | 220 | mm | Bore diameter |
| D | 400 | mm | Outside diameter |
| B | 65 | mm | Width |
| FW | 268 | mm | Raceway diameter of inner ring |
| r (min.) | 4 | mm | Chamfer dimension |
| r1 (min.) | 4 | mm | Chamfer dimension |
| Cr | 1110000 | N | Basic dynamic load rating |
| C0r | 1250000 | N | Basic static load rating |
| Thermal Speed Rating (Oil-bath) | 1700 | min-1 | Oil-bath lubrication subject to conditions outlined in ISO 15312 |
| Grease | 1500 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 1800 | min-1 | Oil-bath lubrication |
| da (min.) | 236 | mm | Diameter of shaft abutment |
| dd (min.) | 289 | mm | Diameter of shaft abutment |
| Da (max.) | 384 | mm | Diameter of housing abutment |
| ra (max.) | 3 | mm | Radius of shaft or housing fillet |
| rb (max.) | 3 | mm | Radius of shaft or housing fillet |
| (approx.) | 38.6 | kg |