100BNRD10J
| BNRD: 18° | Bearing Type | ||
| d | 100 | mm | Bore diameter |
| D | 150 | mm | Outside diameter |
| B | 24 | mm | Width |
| r(min.) | 1.5 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 84.0 | kN | Basic Dynamic Load Rating |
| C0r | 39.0 | kN | Basic Static Load Rating |
| Grease | 14400 | min-1 | Limiting Speed |
| Oil (Oil-air) | 22400 | min-1 | Limiting Speed |
| da(min.) | 109 | mm | Diameter of Shaft Abutment |
| Da(max.) | 141 | mm | Diameter of Housing Abutment |
| Db(max.) | 144 | mm | Diameter of Housing Abutment |
| ra(max.) | 1.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.8 | mm | Radius of Shaft or Housing Fillet |
| f0 | 8.20 | Factor |
Performance
| Pa | 38.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 82N/μm | 0μm |
| L | 706N | 167N/μm | -19μm |
| M | 1488N | 223N/μm | -35μm |
| 1.10 | kg | Mass(approx.) |