110BNRD10J
| BNRD: 18° | Bearing Type | ||
| d | 110 | mm | Bore diameter |
| D | 170 | mm | Outside diameter |
| B | 28 | mm | Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 118 | kN | Basic Dynamic Load Rating |
| C0r | 53.0 | kN | Basic Static Load Rating |
| Grease | 12900 | min-1 | Limiting Speed |
| Oil (Oil-air) | 20000 | min-1 | Limiting Speed |
| da(min.) | 120 | mm | Diameter of Shaft Abutment |
| Da(max.) | 160 | mm | Diameter of Housing Abutment |
| Db(max.) | 164 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| f0 | 8.10 | Factor |
Performance
| Pa | 51.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 81N/μm | 0μm |
| L | 986N | 183N/μm | -26μm |
| M | 1996N | 241N/μm | -45μm |
| 1.65 | kg | Mass(approx.) |