140TAC20X+L
| d | 140 | mm | Bore diameter |
| D | 210 | mm | Outside diameter |
| T | 84 | mm | Inner Ring Width |
| C | 42 | mm | Outer Ring Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Ca | 183 | kN | Basic Dynamic Load Rating |
| C0a | 525 | kN | Basic Static Load Rating |
| Grease | 2600 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2900 | min-1 | Limiting Speed (C6-Preload) |
| Grease | 2300 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 2500 | min-1 | Limiting Speed (C7-Preload) |
| Grease | 1900 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 2100 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 167 | mm | Diameter of Shaft Abutment |
| Da | 198 | mm | Diameter of Housing Abutment |
Performance
| Pa | 325 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 925N | 1194N/μm | -3μm |
| C7 | 3675N | 1898N/μm | -10μm |
| C8 | 9343N | 2603N/μm | -20μm |
| 8.67 | kg | Mass(approx.) |