200TAC20D+L
| d | 200 | mm | Bore diameter |
| D | 310 | mm | Outside diameter |
| T | 132 | mm | Inner Ring Width |
| C | 66 | mm | Outer Ring Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 395 | kN | Basic Dynamic Load Rating |
| C0a | 1180 | kN | Basic Static Load Rating |
| Grease | 1800 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2000 | min-1 | Limiting Speed (C6-Preload) |
| Grease | 1600 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 1700 | min-1 | Limiting Speed (C7-Preload) |
| Grease | 1300 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1400 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 245 | mm | Diameter of Shaft Abutment |
| Da | 291 | mm | Diameter of Housing Abutment |
Performance
| Pa | 736 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 3083N | 1947N/μm | -8μm |
| C7 | 7714N | 2650N/μm | -16μm |
| C8 | 18677N | 3575N/μm | -30μm |
| 29.6 | kg | Mass(approx.) |