7932C
| d | 160 | mm | Bore diameter |
| D | 220 | mm | Outside diameter |
| B | 28 | mm | Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 134 | kN | Basic Dynamic Load Rating |
| C0r | 133 | kN | Basic Static Load Rating |
| Grease | 5600 | min-1 | Limiting Speed |
| Oil (Oil-air) | 8700 | min-1 | Limiting Speed |
| da(min.) | 170 | mm | Diameter of Shaft Abutment |
| Da(max.) | 210 | mm | Diameter of Housing Abutment |
| Db(max.) | 214 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| f0 | 16.7 | Factor |
Performance
| Pa | 80.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 431N | 134N/μm | -8μm |
| L | 863N | 179N/μm | -19μm |
| M | 1954N | 258N/μm | -39μm |
| H | 3882N | 360N/μm | -64μm |
| 3.10 | kg | Mass(approx.) |