85BER10H
| BER: 25° | Bearing Type | ||
| d | 85 | mm | Bore diameter |
| D | 130 | mm | Outside diameter |
| B | 22 | mm | Width |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 32.5 | kN | Basic Dynamic Load Rating |
| C0r | 23.6 | kN | Basic Static Load Rating |
| Grease | 14900 | min-1 | Limiting Speed |
| Oil (Oil-air) | 23300 | min-1 | Limiting Speed |
| da(min.) | 92 | mm | Diameter of Shaft Abutment |
| Da(max.) | 123 | mm | Diameter of Housing Abutment |
| Db(max.) | 125 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 29.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 136N/μm | 0μm |
| L | 723N | 271N/μm | -12μm |
| M | 1508N | 355N/μm | -22μm |
| 0.906 | kg | Mass(approx.) |