170BER19H
| BER: 25° | Bearing Type | ||
| d | 170 | mm | Bore diameter |
| D | 230 | mm | Outside diameter |
| B | 28 | mm | Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 102 | kN | Basic Dynamic Load Rating |
| C0r | 87.5 | kN | Basic Static Load Rating |
| Grease | 7500 | min-1 | Limiting Speed |
| Oil (Oil-air) | 12000 | min-1 | Limiting Speed |
| da(min.) | 180 | mm | Diameter of Shaft Abutment |
| Da(max.) | 220 | mm | Diameter of Housing Abutment |
| Db(max.) | 224 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 110 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 196N | 223N/μm | 0μm |
| L | 1712N | 468N/μm | -17μm |
| M | 3609N | 612N/μm | -31μm |
| 2.47 | kg | Mass(approx.) |