160TAC29D+L
| d | 160 | mm | Bore diameter |
| D | 220 | mm | Outside diameter |
| T | 72 | mm | Inner Ring Width |
| C | 36 | mm | Outer Ring Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Ca | 149 | kN | Basic Dynamic Load Rating |
| C0a | 490 | kN | Basic Static Load Rating |
| Grease | 2400 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2700 | min-1 | Limiting Speed (C6-Preload) |
| Grease | 2100 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 2300 | min-1 | Limiting Speed (C7-Preload) |
| Grease | 1700 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1900 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 182 | mm | Diameter of Shaft Abutment |
| Da | 210 | mm | Diameter of Housing Abutment |
Performance
| Pa | 307 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 196N | 803N/μm | 0μm |
| C7 | 4309N | 2263N/μm | -10μm |
| C8 | 7432N | 2722N/μm | -15μm |
| 6.45 | kg | Mass(approx.) |