200BAR10S
| BAR: 30° | Bearing Type | ||
| d | 200 | mm | Bore diameter |
| D | 310 | mm | Outside diameter |
| 2B | 99 | mm | Assembled Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 169 | kN | Basic Dynamic Load Rating |
| C0a | 444 | kN | Basic Static Load Rating |
| Grease | 3000 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 3800 | min-1 | Limiting Speed (EL-Preload) |
| Grease | 2600 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 3300 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 212 | mm | Diameter of Shaft Abutment |
| Db(max.) | 303 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 300 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 617N | 396N/μm | -5μm |
| L | 6055N | 873N/μm | -38μm |
| 14.2 | kg | Mass(approx.) |