220TAC29D+L
| d | 220 | mm | Bore diameter |
| D | 300 | mm | Outside diameter |
| T | 96 | mm | Inner Ring Width |
| C | 48 | mm | Outer Ring Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 265 | kN | Basic Dynamic Load Rating |
| C0a | 930 | kN | Basic Static Load Rating |
| Grease | 1800 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2000 | min-1 | Limiting Speed (C6-Preload) |
| Grease | 1600 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 1700 | min-1 | Limiting Speed (C7-Preload) |
| Grease | 1300 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1400 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 250 | mm | Diameter of Shaft Abutment |
| Da | 287 | mm | Diameter of Housing Abutment |
Performance
| Pa | 577 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 1160N | 1613N/μm | -3μm |
| C7 | 4933N | 2621N/μm | -10μm |
| C8 | 12790N | 3616N/μm | -20μm |
| 17.0 | kg | Mass(approx.) |