65BAR10E
| BAR: 30° | Bearing Type | ||
| d | 65 | mm | Bore diameter |
| D | 100 | mm | Outside diameter |
| 2B | 33 | mm | Assembled Width |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Ca | 19.5 | kN | Basic Dynamic Load Rating |
| C0a | 41.5 | kN | Basic Static Load Rating |
| Grease | 9700 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 12400 | min-1 | Limiting Speed (EL-Preload) |
| Grease | 8300 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 10600 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 72 | mm | Diameter of Shaft Abutment |
| Db(max.) | 95 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 27.7 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 253N | 203N/μm | -5μm |
| L | 687N | 289N/μm | -12μm |
| 0.450 | kg | Mass(approx.) |