7010A
| d | 50 | mm | Bore diameter |
| D | 80 | mm | Outside diameter |
| B | 16 | mm | Width |
| r(min.) | 1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 29.8 | kN | Basic Dynamic Load Rating |
| C0r | 20.1 | kN | Basic Static Load Rating |
| Grease | 11600 | min-1 | Limiting Speed |
| Oil (Oil-air) | 15400 | min-1 | Limiting Speed |
| da(min.) | 56 | mm | Diameter of Shaft Abutment |
| Da(max.) | 74 | mm | Diameter of Housing Abutment |
| Db(max.) | 75 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.5 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 12.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 49N | 113N/μm | 0μm |
| L | 243N | 194N/μm | -5μm |
| M | 525N | 256N/μm | -10μm |
| H | 1299N | 360N/μm | -20μm |
| 0.262 | kg | Mass(approx.) |