HR30307J
| d | 35 | mm | Bore diameter |
| D | 80 | mm | Outside diameter |
| T | 22.75 | mm | Total width |
| B | 21 | mm | Width of inner ring |
| C | 18 | mm | Width of outer ring |
| Cup r (min.) | 1.5 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 2 | mm | Chamfer dimension of inner ring (Cone) |
| Cr | 93500 | N | Basic dynamic load rating |
| C0r | 79000 | N | Basic static load rating |
| Grease | 4800 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 6700 | min-1 | Oil-bath lubrication |
| da (min.) | 47 | mm | Diameter of shaft abutment |
| Db (min.) | 74 | mm | Diameter of housing abutment |
| Da (min.) | 69 | mm | Diameter of housing abutment |
| Da (max.) | 71 | mm | Diameter of housing abutment |
| Sa | 3 | mm | Minimum width of space required in housing on large side face |
| Sb | 4.5 | mm | Minimum width of space required in housing on small side face |
| db (max.) | 45 | mm | Diameter of shaft abutment |
| ra (max.) | 2 | mm | Radius of shaft or housing fillet of inner ring |
| ra (max.) | 1.5 | mm | Radius of shaft or housing fillet of outer ring |
| e | 0.32 | Constant | |
| Y0 | 1.1 | Axial load Factors | |
| Y1 | 1.9 | Axial load Factors |
| (approx.) | 0.538 | kg |