JM716648/JM716610
| d | 85 | mm | Bore diameter |
| D | 130 | mm | Outside diameter |
| T | 30 | mm | Total width |
| B | 29 | mm | Width of inner ring |
| C | 24 | mm | Width of outer ring |
| Cup r (min.) | 2.5 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 6 | mm | Chamfer dimension of inner ring (Cone) |
| Cr | 170000 | N | Basic dynamic load rating |
| C0r | 222000 | N | Basic static load rating |
| Grease | 2600 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 3600 | min-1 | Oil-bath lubrication |
| da | 104 | mm | Diameter of shaft abutment |
| Da | 117 | mm | Diameter of housing abutment |
| db | 92 | mm | Diameter of shaft abutment |
| Db | 125 | mm | Diameter of housing abutment |
| ra (max.) | 6 | mm | Radius of shaft or housing fillet of inner ring |
| ra (max.) | 2.5 | mm | Radius of shaft or housing fillet of outer ring |
| e | 0.44 | Constant | |
| Y0 | 0.74 | Axial load Factors | |
| Y1 | 1.4 | Axial load Factors |
| CONE (approx.) | 0.931 | kg | |
| CUP (approx.) | 0.461 | kg |