7048C
| d | 240 | mm | Diámetro interior |
| D | 360 | mm | Diámetro exterior |
| B | 56 | mm | Anchura |
| r(min.) | 3 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Cr | 415 | kN | Basic Dynamic Load Rating |
| C0r | 475 | kN | Basic Static Load Rating |
| Grasa | 3500 | min-1 | Limiting Speed |
| Oil (Oil-air) | 5500 | min-1 | Limiting Speed |
| da(min.) | 254 | mm | Diameter of Shaft Abutment |
| Da(max.) | 346 | mm | Diameter of Housing Abutment |
| Db(max.) | 353 | mm | Diameter of Housing Abutment |
| ra(max.) | 2.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| f0 | 15.9 | Factor |
Performance
| Pa | 292 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 1699N | 244N/μm | -33μm |
| L | 3337N | 324N/μm | -56μm |
| M | 7134N | 455N/μm | -95μm |
| H | 14212N | 636N/μm | -147μm |
| 19.0 | kg | Mass(approx.) |