N1015MR
| d | 75 | mm | Diámetro interior |
| D | 115 | mm | Diámetro exterior |
| B | 20 | mm | Anchura |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 69.0 | kN | Basic Dynamic Load Rating |
| C0r | 74.5 | kN | Basic Static Load Rating |
| Grasa | 8500 | min-1 | Limiting Speed |
| Oil (Oil-air) | 13700 | min-1 | Limiting Speed |
| da(min.) | 81.5 | mm | Diameter of Shaft Abutment |
| d1a(min.) | 83 | mm | Diameter of Shaft Abutment |
| Da(min.) | 106 | mm | Diameter of Housing Abutment |
| Da(max.) | 110 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| 0.700 | kg | Mass(approx.) |