110BAR10E
| BAR: 30° | Bearing Type | ||
| d | 110 | mm | Diámetro interior |
| D | 170 | mm | Diámetro exterior |
| 2B | 54 | mm | Assembled Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Ca | 55.5 | kN | Basic Dynamic Load Rating |
| C0a | 131 | kN | Basic Static Load Rating |
| Grasa | 5800 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 7300 | min-1 | Limiting Speed (EL-Preload) |
| Grasa | 5000 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 6300 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 120 | mm | Diameter of Shaft Abutment |
| Db(max.) | 164 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 89.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 391N | 284N/μm | -5μm |
| L | 1868N | 489N/μm | -20μm |
| 1.97 | kg | Mass(approx.) |