180BAR10S
| BAR: 30° | Bearing Type | ||
| d | 180 | mm | Diámetro interior |
| D | 280 | mm | Diámetro exterior |
| 2B | 90 | mm | Assembled Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 151 | kN | Basic Dynamic Load Rating |
| C0a | 385 | kN | Basic Static Load Rating |
| Grasa | 3300 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 4200 | min-1 | Limiting Speed (EL-Preload) |
| Grasa | 2900 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 3600 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 192 | mm | Diameter of Shaft Abutment |
| Db(max.) | 273 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 262 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 606N | 385N/μm | -5μm |
| L | 5259N | 814N/μm | -35μm |
| 10.2 | kg | Mass(approx.) |