HR320/22XJ
| d | 22 | mm | Diámetro interior |
| D | 44 | mm | Diámetro exterior |
| T | 15 | mm | Total width |
| B | 15 | mm | Width of inner ring |
| C | 11.5 | mm | Width of outer ring |
| Cup r (min.) | 0.6 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 0.6 | mm | Chamfer dimension of inner ring (Cone) |
| Cr | 31500 | N | Capacidad de carga dinámica básica |
| C0r | 29400 | N | Capacidad de carga estática básica |
| Grasa | 8500 | min-1 | Lubricación con grasa |
| Aceite (baño de aceite) | 11000 | min-1 | Lubricación por baño de aceite |
| da (min.) | 30 | mm | Diámetro del pilar del eje |
| Db (min.) | 42 | mm | Diámetro del pilar de la carcasa |
| Da (min.) | 37 | mm | Diámetro del pilar de la carcasa |
| Da (máx.) | 39 | mm | Diámetro del pilar de la carcasa |
| Sa | 3 | mm | Minimum width of space required in housing on large side face |
| Sb | 3.5 | mm | Minimum width of space required in housing on small side face |
| db (max.) | 27 | mm | Diámetro del pilar del eje |
| ra (máx.) | 0.6 | mm | Radius of shaft or housing fillet of inner ring |
| ra (máx.) | 0.6 | mm | Radius of shaft or housing fillet of outer ring |
| e | 0.4 | Constante | |
| Y0 | 0.83 | Carga axial Factores | |
| Y1 | 1.5 | Carga axial Factores |
| (aprox.) | 0.103 | kg |