160TAC20X+L
| d | 160 | mm | Diámetro interior |
| D | 240 | mm | Diámetro exterior |
| T | 96 | mm | Inner Ring Width |
| C | 48 | mm | Outer Ring Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 233 | kN | Basic Dynamic Load Rating |
| C0a | 685 | kN | Basic Static Load Rating |
| Grasa | 2300 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2500 | min-1 | Limiting Speed (C6-Preload) |
| Grasa | 2000 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 2200 | min-1 | Limiting Speed (C7-Preload) |
| Grasa | 1700 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1800 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 191 | mm | Diameter of Shaft Abutment |
| Da | 228 | mm | Diameter of Housing Abutment |
Performance
| Pa | 424 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 1277N | 1368N/μm | -4μm |
| C7 | 4837N | 2140N/μm | -12μm |
| C8 | 11088N | 2833N/μm | -22μm |
| 12.9 | kg | Mass(approx.) |