220BTR10S
| BTR: 40° | Bearing Type | ||
| d | 220 | mm | Diámetro interior |
| D | 340 | mm | Diámetro exterior |
| 2B | 108 | mm | Assembled Width |
| r(min.) | 3 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 224 | kN | Basic Dynamic Load Rating |
| C0a | 575 | kN | Basic Static Load Rating |
| Grasa | 2000 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 2700 | min-1 | Limiting Speed (EL-Preload) |
| Grasa | 1700 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 2300 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 234 | mm | Diameter of Shaft Abutment |
| Db(max.) | 333 | mm | Diameter of Housing Abutment |
| ra(max.) | 2.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 305 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 905N | 695N/μm | -5μm |
| L | 8208N | 1468N/μm | -31μm |
| 18.5 | kg | Mass(approx.) |