7030C
| d | 150 | mm | Bore diameter |
| D | 225 | mm | Outside diameter |
| B | 35 | mm | Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Cr | 190 | kN | Basic Dynamic Load Rating |
| C0r | 168 | kN | Basic Static Load Rating |
| Grease | 6200 | min-1 | Limiting Speed |
| Oil (Oil-air) | 9400 | min-1 | Limiting Speed |
| da(min.) | 162 | mm | Diameter of Shaft Abutment |
| Da(max.) | 213 | mm | Diameter of Housing Abutment |
| Db(max.) | 218 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| f0 | 16.0 | Factor |
Performance
| Pa | 105 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 577N | 140N/μm | -13μm |
| L | 1149N | 186N/μm | -27μm |
| M | 2764N | 276N/μm | -55μm |
| H | 5487N | 386N/μm | -88μm |
| 4.15 | kg | Mass(approx.) |