95BNR19H
| BNR: 18° | Bearing Type | ||
| d | 95 | mm | Bore diameter |
| D | 130 | mm | Outside diameter |
| B | 18 | mm | Width |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 40.0 | kN | Basic Dynamic Load Rating |
| C0r | 29.7 | kN | Basic Static Load Rating |
| Grease | 16000 | min-1 | Limiting Speed |
| Oil (Oil-air) | 24900 | min-1 | Limiting Speed |
| da(min.) | 102 | mm | Diameter of Shaft Abutment |
| Da(max.) | 123 | mm | Diameter of Housing Abutment |
| Db(max.) | 125 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
| f0 | 10.9 | Factor |
Performance
| Pa | 32.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 86N/μm | 0μm |
| L | 314N | 129N/μm | -8μm |
| M | 878N | 191N/μm | -22μm |
| 0.497 | kg | Mass(approx.) |