140BNR10E
| BNR: 18° | Bearing Type | ||
| d | 140 | mm | Bore diameter |
| D | 210 | mm | Outside diameter |
| B | 33 | mm | Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 82.0 | kN | Basic Dynamic Load Rating |
| C0r | 71.5 | kN | Basic Static Load Rating |
| Grease | 8600 | min-1 | Limiting Speed |
| Oil (Oil-air) | 12300 | min-1 | Limiting Speed |
| da(min.) | 150 | mm | Diameter of Shaft Abutment |
| Da(max.) | 200 | mm | Diameter of Housing Abutment |
| Db(max.) | 204 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| f0 | 11.0 | Factor |
Performance
| Pa | 97.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 196N | 114N/μm | 0μm |
| L | 766N | 186N/μm | -15μm |
| M | 1642N | 250N/μm | -31μm |
| 3.65 | kg | Mass(approx.) |