N1040MR
| d | 200 | mm | Bore diameter |
| D | 310 | mm | Outside diameter |
| B | 51 | mm | Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 2.1 | mm | Chamfer Dimension |
| Cr | 450 | kN | Basic Dynamic Load Rating |
| C0r | 580 | kN | Basic Static Load Rating |
| Grease | 3000 | min-1 | Limiting Speed |
| Oil (Oil-air) | 3700 | min-1 | Limiting Speed |
| da(min.) | 211 | mm | Diameter of Shaft Abutment |
| d1a(min.) | 215 | mm | Diameter of Shaft Abutment |
| Da(min.) | 284 | mm | Diameter of Housing Abutment |
| Da(max.) | 299 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| 13.5 | kg | Mass(approx.) |