105BAR10H
| BAR: 30° | Bearing Type | ||
| d | 105 | mm | Bore diameter |
| D | 160 | mm | Outside diameter |
| 2B | 49.5 | mm | Assembled Width |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Ca | 49.5 | kN | Basic Dynamic Load Rating |
| C0a | 110 | kN | Basic Static Load Rating |
| Grease | 6500 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 8000 | min-1 | Limiting Speed (EL-Preload) |
| Grease | 5600 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 6800 | min-1 | Limiting Speed (L-Preload) |
| da(min.) | 115 | mm | Diameter of Shaft Abutment |
| Db(max.) | 154 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 53.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 426N | 320N/μm | -5μm |
| L | 2107N | 560N/μm | -20μm |
| 1.62 | kg | Mass(approx.) |