80BNR10H
| BNR: 18° | Bearing Type | ||
| d | 80 | mm | Bore diameter |
| D | 125 | mm | Outside diameter |
| B | 22 | mm | Width |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 33.5 | kN | Basic Dynamic Load Rating |
| C0r | 23.5 | kN | Basic Static Load Rating |
| Grease | 17600 | min-1 | Limiting Speed |
| Oil (Oil-air) | 27400 | min-1 | Limiting Speed |
| da(min.) | 87 | mm | Diameter of Shaft Abutment |
| Da(max.) | 118 | mm | Diameter of Housing Abutment |
| Db(max.) | 120 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
| f0 | 10.9 | Factor |
Performance
| Pa | 23.4 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 80N/μm | 0μm |
| L | 359N | 127N/μm | -10μm |
| M | 688N | 164N/μm | -19μm |
| 0.867 | kg | Mass(approx.) |