130TAC29F
| d | 130 | mm | Diameter lubang |
| D | 180 | mm | Diameter luar |
| T | 60 | mm | Inner Ring Width |
| C | 30 | mm | Outer Ring Width |
| r(min.) | 1.5 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Ca | 74.5 | kN | Basic Dynamic Load Rating |
| C0a | 276 | kN | Basic Static Load Rating |
| Gemuk | 2900 | min-1 | Limiting Speed (EL-Preload) |
| Oil (Oil-air) | 3200 | min-1 | Limiting Speed (EL-Preload) |
| Gemuk | 2500 | min-1 | Limiting Speed (L-Preload) |
| Oil (Oil-air) | 2800 | min-1 | Limiting Speed (L-Preload) |
| ra(max.) | 1.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 150 | mm | Diameter of Shaft Abutment |
| Da | 170 | mm | Diameter of Housing Abutment |
Performance
| Pa | 43.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 1102N | 1062N/μm | -5μm |
| L | 4666N | 1741N/μm | -15μm |
Holes Dimensions
| W | 10 | mm | Oil Groove Width |
| m | 4 | Number of Holes | |
| L | 5 | mm | Notch Width |
| 1.89 | kg | Mass(approx.) |