HR32303J
| d | 17 | mm | Diameter lubang |
| D | 47 | mm | Diameter luar |
| T | 20.25 | mm | Total width |
| B | 19 | mm | Width of inner ring |
| C | 16 | mm | Width of outer ring |
| Cup r (min.) | 1 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 1 | mm | Chamfer dimension of inner ring (Cone) |
| Cr | 46000 | N | Peringkat beban dinamis dasar |
| C0r | 36500 | N | Peringkat beban statis dasar |
| Gemuk | 8500 | min-1 | Pelumasan gemuk |
| Minyak (Rendaman minyak) | 11000 | min-1 | Pelumasan dengan rendaman minyak |
| da (min.) | 28 | mm | Diameter penyangga poros |
| Db (min.) | 43 | mm | Diameter penyangga rumah |
| Da (min.) | 39 | mm | Diameter penyangga rumah |
| Da (maks.) | 41 | mm | Diameter penyangga rumah |
| Sa | 2 | mm | Minimum width of space required in housing on large side face |
| Sb | 4 | mm | Minimum width of space required in housing on small side face |
| db (max.) | 23 | mm | Diameter penyangga poros |
| ra (maks.) | 1 | mm | Radius of shaft or housing fillet of inner ring |
| ra (maks.) | 1 | mm | Radius of shaft or housing fillet of outer ring |
| e | 0.29 | Konstan | |
| Y0 | 1.2 | Faktor beban aksial | |
| Y1 | 2.1 | Faktor beban aksial |
| (Perkiraan) | 0.178 | kg |