7206C
| d | 30 | mm | Diametro del foro |
| D | 62 | mm | Diametro esterno |
| B | 16 | mm | Larghezza |
| r(min.) | 1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 29.0 | kN | Basic Dynamic Load Rating |
| C0r | 14.7 | kN | Basic Static Load Rating |
| Grasso | 25000 | min-1 | Limiting Speed |
| Oil (Oil-air) | 38100 | min-1 | Limiting Speed |
| da(min.) | 36 | mm | Diameter of Shaft Abutment |
| Da(max.) | 56 | mm | Diameter of Housing Abutment |
| Db(max.) | 57 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.5 | mm | Radius of Shaft or Housing Fillet |
| f0 | 13.9 | Factor |
Performance
| Pa | 10.3 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 57N | 33N/μm | -1μm |
| L | 114N | 43N/μm | -7μm |
| M | 292N | 66N/μm | -20μm |
| H | 591N | 94N/μm | -35μm |
| 0.194 | kg | Mass(approx.) |