7213C
| d | 65 | mm | Diametro del foro |
| D | 120 | mm | Diametro esterno |
| B | 23 | mm | Larghezza |
| r(min.) | 1.5 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 92.0 | kN | Basic Dynamic Load Rating |
| C0r | 58.5 | kN | Basic Static Load Rating |
| Grasso | 12500 | min-1 | Limiting Speed |
| Oil (Oil-air) | 19000 | min-1 | Limiting Speed |
| da(min.) | 74 | mm | Diameter of Shaft Abutment |
| Da(max.) | 111 | mm | Diameter of Housing Abutment |
| Db(max.) | 114 | mm | Diameter of Housing Abutment |
| ra(max.) | 1.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.8 | mm | Radius of Shaft or Housing Fillet |
| f0 | 14.6 | Factor |
Performance
| Pa | 40.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 219N | 71N/μm | -12μm |
| L | 448N | 95N/μm | -23μm |
| M | 1069N | 141N/μm | -44μm |
| H | 2175N | 200N/μm | -70μm |
| 1.01 | kg | Mass(approx.) |