110BER10H
| BER: 25° | Bearing Type | ||
| d | 110 | mm | Diametro del foro |
| D | 170 | mm | Diametro esterno |
| B | 28 | mm | Larghezza |
| r(min.) | 2 | mm | Chamfer Dimension |
| r1(min.) | 1 | mm | Chamfer Dimension |
| Cr | 55.5 | kN | Basic Dynamic Load Rating |
| C0r | 43.0 | kN | Basic Static Load Rating |
| Grasso | 11500 | min-1 | Limiting Speed |
| Oil (Oil-air) | 17900 | min-1 | Limiting Speed |
| da(min.) | 120 | mm | Diameter of Shaft Abutment |
| Da(max.) | 160 | mm | Diameter of Housing Abutment |
| Db(max.) | 164 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 54.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 153N/μm | 0μm |
| L | 1065N | 344N/μm | -15μm |
| M | 2153N | 445N/μm | -26μm |
| 2.00 | kg | Mass(approx.) |