150TAC20X+L
| d | 150 | mm | Diametro del foro |
| D | 225 | mm | Diametro esterno |
| T | 90 | mm | Inner Ring Width |
| C | 45 | mm | Outer Ring Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 216 | kN | Basic Dynamic Load Rating |
| C0a | 620 | kN | Basic Static Load Rating |
| Grasso | 2400 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2700 | min-1 | Limiting Speed (C6-Preload) |
| Grasso | 2100 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 2300 | min-1 | Limiting Speed (C7-Preload) |
| Grasso | 1700 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1900 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 178 | mm | Diameter of Shaft Abutment |
| Da | 213 | mm | Diameter of Housing Abutment |
Performance
| Pa | 382 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 934N | 1210N/μm | -3μm |
| C7 | 4725N | 2086N/μm | -12μm |
| C8 | 9467N | 2639N/μm | -20μm |
| 10.6 | kg | Mass(approx.) |