200TAC29D+L
| d | 200 | mm | Diametro del foro |
| D | 280 | mm | Diametro esterno |
| T | 96 | mm | Inner Ring Width |
| C | 48 | mm | Outer Ring Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 257 | kN | Basic Dynamic Load Rating |
| C0a | 855 | kN | Basic Static Load Rating |
| Grasso | 1900 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 2100 | min-1 | Limiting Speed (C6-Preload) |
| Grasso | 1700 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 1800 | min-1 | Limiting Speed (C7-Preload) |
| Grasso | 1400 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1500 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 230 | mm | Diameter of Shaft Abutment |
| Da | 267 | mm | Diameter of Housing Abutment |
Performance
| Pa | 531 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 1098N | 1502N/μm | -3μm |
| C7 | 4597N | 2427N/μm | -10μm |
| C8 | 11866N | 3344N/μm | -20μm |
| 15.7 | kg | Mass(approx.) |