220TAC20D+L
| d | 220 | mm | Diametro del foro |
| D | 340 | mm | Diametro esterno |
| T | 144 | mm | Inner Ring Width |
| C | 72 | mm | Outer Ring Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 455 | kN | Basic Dynamic Load Rating |
| C0a | 1390 | kN | Basic Static Load Rating |
| Grasso | 1600 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 1800 | min-1 | Limiting Speed (C6-Preload) |
| Grasso | 1400 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 1600 | min-1 | Limiting Speed (C7-Preload) |
| Grasso | 1200 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1300 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 272 | mm | Diameter of Shaft Abutment |
| Da | 320 | mm | Diameter of Housing Abutment |
Performance
| Pa | 856 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 3247N | 2063N/μm | -8μm |
| C7 | 4331N | 2273N/μm | -10μm |
| C8 | 19791N | 3794N/μm | -30μm |
| 39.1 | kg | Mass(approx.) |