240TAC20D+L
| d | 240 | mm | Diametro del foro |
| D | 360 | mm | Diametro esterno |
| T | 144 | mm | Inner Ring Width |
| C | 72 | mm | Outer Ring Width |
| r(min.) | 3 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Ca | 455 | kN | Basic Dynamic Load Rating |
| C0a | 1450 | kN | Basic Static Load Rating |
| Grasso | 1500 | min-1 | Limiting Speed (C6-Preload) |
| Oil (Oil-air) | 1700 | min-1 | Limiting Speed (C6-Preload) |
| Grasso | 1300 | min-1 | Limiting Speed (C7-Preload) |
| Oil (Oil-air) | 1500 | min-1 | Limiting Speed (C7-Preload) |
| Grasso | 1100 | min-1 | Limiting Speed (C8-Preload) |
| Oil (Oil-air) | 1200 | min-1 | Limiting Speed (C8-Preload) |
| ra(max.) | 2.5 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| da | 290 | mm | Diameter of Shaft Abutment |
| Da | 341 | mm | Diameter of Housing Abutment |
Performance
| Pa | 893 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| C6 | 3345N | 2133N/μm | -8μm |
| C7 | 9161N | 2993N/μm | -17μm |
| C8 | 20465N | 3927N/μm | -30μm |
| 42.2 | kg | Mass(approx.) |