JL725346/JL725316
| d | 125 | mm | Bore diameter |
| D | 175 | mm | Outside diameter |
| T | 25.4 | mm | Total width |
| B | 25.4 | mm | Width of inner ring |
| C | 18.288 | mm | Width of outer ring |
| Cup r (min.) | 3.3 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 3.3 | mm | Chamfer dimension of inner ring (Cone) |
| Cr | 165000 | N | Basic dynamic load rating |
| C0r | 232000 | N | Basic static load rating |
| Grease | 1800 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 2400 | min-1 | Oil-bath lubrication |
| da | 138 | mm | Diameter of shaft abutment |
| Da | 161 | mm | Diameter of housing abutment |
| db | 133 | mm | Diameter of shaft abutment |
| Db | 168 | mm | Diameter of housing abutment |
| ra (max.) | 3.3 | mm | Radius of shaft or housing fillet of inner ring |
| ra (max.) | 3.3 | mm | Radius of shaft or housing fillet of outer ring |
| e | 0.48 | Constant | |
| Y0 | 0.69 | Axial load Factors | |
| Y1 | 1.3 | Axial load Factors |
| CONE (approx.) | 1.19 | kg | |
| CUP (approx.) | 0.573 | kg |