7016A
| d | 80 | mm | Bore diameter |
| D | 125 | mm | Outside diameter |
| B | 22 | mm | Width |
| r(min.) | 1.1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 67.5 | kN | Basic Dynamic Load Rating |
| C0r | 50.5 | kN | Basic Static Load Rating |
| Grease | 7400 | min-1 | Limiting Speed |
| Oil (Oil-air) | 9800 | min-1 | Limiting Speed |
| da(min.) | 87 | mm | Diameter of Shaft Abutment |
| Da(max.) | 118 | mm | Diameter of Housing Abutment |
| Db(max.) | 120 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 31.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 98N | 170N/μm | 0μm |
| L | 752N | 340N/μm | -10μm |
| M | 1762N | 464N/μm | -20μm |
| H | 3060N | 573N/μm | -30μm |
| 0.864 | kg | Mass(approx.) |