35BER19S
| BER: 25° | Bearing Type | ||
| d | 35 | mm | Bore diameter |
| D | 55 | mm | Outside diameter |
| B | 10 | mm | Width |
| r(min.) | 0.6 | mm | Chamfer Dimension |
| r1(min.) | 0.3 | mm | Chamfer Dimension |
| Cr | 11.1 | kN | Basic Dynamic Load Rating |
| C0r | 5.75 | kN | Basic Static Load Rating |
| Grease | 26700 | min-1 | Limiting Speed |
| Oil (Oil-air) | 37800 | min-1 | Limiting Speed |
| da(min.) | 40 | mm | Diameter of Shaft Abutment |
| Da(max.) | 50 | mm | Diameter of Housing Abutment |
| Db(max.) | 52.5 | mm | Diameter of Housing Abutment |
| ra(max.) | 0.6 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.3 | mm | Radius of Shaft or Housing Fillet |
Performance
| Pa | 10.0 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 49N | 61N/μm | 0μm |
| L | 214N | 102N/μm | -8μm |
| M | 419N | 132N/μm | -15μm |
| 0.072 | kg | Mass(approx.) |