50BNRD10J
| BNRD: 18° | Bearing Type | ||
| d | 50 | mm | Bore diameter |
| D | 80 | mm | Outside diameter |
| B | 16 | mm | Width |
| r(min.) | 1 | mm | Chamfer Dimension |
| r1(min.) | 0.6 | mm | Chamfer Dimension |
| Cr | 28.7 | kN | Basic Dynamic Load Rating |
| C0r | 11.1 | kN | Basic Static Load Rating |
| Grease | 27700 | min-1 | Limiting Speed |
| Oil (Oil-air) | 43100 | min-1 | Limiting Speed |
| da(min.) | 56 | mm | Diameter of Shaft Abutment |
| Da(max.) | 74 | mm | Diameter of Housing Abutment |
| Db(max.) | 75 | mm | Diameter of Housing Abutment |
| ra(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 0.5 | mm | Radius of Shaft or Housing Fillet |
| f0 | 8.10 | Factor |
Performance
| Pa | 10.7 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 49N | 50N/μm | 0μm |
| L | 200N | 83N/μm | -9μm |
| M | 418N | 110N/μm | -18μm |
| 0.234 | kg | Mass(approx.) |