32088
| d | 440 | mm | Bore diameter |
| D | 650 | mm | Outside diameter |
| T | 130 | mm | Total width |
| B | 122 | mm | Width of inner ring |
| C | 104 | mm | Width of outer ring |
| Cup r (min.) | 6 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 6 | mm | Chamfer dimension of inner ring (Cone) |
| Cr | 2740000 | N | Basic dynamic load rating |
| C0r | 4600000 | N | Basic static load rating |
| Grease | 430 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 600 | min-1 | Oil-bath lubrication |
| da (min.) | 473 | mm | Diameter of shaft abutment |
| Db (min.) | 616 | mm | Diameter of housing abutment |
| Da (min.) | 582 | mm | Diameter of housing abutment |
| Da (max.) | 622 | mm | Diameter of housing abutment |
| Sa | 5 | mm | Minimum width of space required in housing on large side face |
| Sb | 26 | mm | Minimum width of space required in housing on small side face |
| db (max.) | 487 | mm | Diameter of shaft abutment |
| ra (max.) | 5 | mm | Radius of shaft or housing fillet of inner ring |
| ra (max.) | 5 | mm | Radius of shaft or housing fillet of outer ring |
| e | 0.36 | Constant | |
| Y0 | 0.92 | Axial load Factors | |
| Y1 | 1.7 | Axial load Factors |
| (approx.) | 136 | kg |