150BNR10H
| BNR: 18° | Bearing Type | ||
| d | 150 | mm | Bore diameter |
| D | 225 | mm | Outside diameter |
| B | 35 | mm | Width |
| r(min.) | 2.1 | mm | Chamfer Dimension |
| r1(min.) | 1.1 | mm | Chamfer Dimension |
| Cr | 96.5 | kN | Basic Dynamic Load Rating |
| C0r | 80.5 | kN | Basic Static Load Rating |
| Grease | 9600 | min-1 | Limiting Speed |
| Oil (Oil-air) | 15000 | min-1 | Limiting Speed |
| da(min.) | 162 | mm | Diameter of Shaft Abutment |
| Da(max.) | 213 | mm | Diameter of Housing Abutment |
| Db(max.) | 218 | mm | Diameter of Housing Abutment |
| ra(max.) | 2 | mm | Radius of Shaft or Housing Fillet |
| rb(max.) | 1 | mm | Radius of Shaft or Housing Fillet |
| f0 | 11.0 | Factor |
Performance
| Pa | 74.5 | kN | Permissible Axial Load |
Preload,Rigidity(DB and DF arrangement)
| Preload | Axial Rigidity | Measured axial clearance | |
| EL | 196N | 129N/μm | 0μm |
| L | 1021N | 232N/μm | -18μm |
| M | 2177N | 310N/μm | -35μm |
| 4.13 | kg | Mass(approx.) |